|
|
Amp
for amp, this may be the world's most powerful winch. The Cut Snake
Winch generates 2,700kgs (6,000lbs) of line pull at an incredibly
efficient power draw of just 67 amps. Other winches with similar pulling
capacity typically consume 400 to 500 amps. The Cut Snake Winch
will not drain your vehicle battery as fast as other winches, which is a critical consideration in emergency
and off-road recovery situations. What's the secret? The Cut Snake Winch is an
hydraulic-electric hybrid
based on unique
patented technology. It blends the best aspects of both electrical and
fluid-driven winches. The standard unit is operated by a
wireless remote and keeps working even when fully submerged in water. Custom units can be built.
"... the best thing that has
happened to winching since the rope was invented." John
Denman, Overlander 4WD Magazine
|
|
|
Two Standard Sizes:
Cut Snake 275 - 6,000lbs line pull - Hydraulic-Electric 2lt
Cut Snake 375 - 12,000lbs line pull - Belt Drive 6lt
| Cut Snake 275
- Hydraulic-Electric 2lt |
| Line
Pull |
Line
Speed ft. |
Motor
Amps |
Layer |
lbs |
| 0 |
30 |
12 |
1 |
6,000 |
| 1,000 |
14 |
16 |
2 |
5,400 |
| 1,500 |
8.6 |
22 |
3 |
4,700 |
| 2,000 |
6.9 |
28 |
4 |
4,200 |
| 3,000 |
5.7 |
34 |
5 |
3,700 |
| 4,000 |
4.3 |
42 |
|
|
| 5,000 |
3.7 |
51 |
|
|
| 6,000 |
3 |
67 |
|
|
| Cut Snake 375 -
Belt Drive 6lt |
| Line
Pull |
Line
Speed ft. |
Motor
Amps |
Layer |
lbs |
| 0 |
45 |
2.5 |
1 |
12,500 |
| 2,000 |
40 |
2.5 |
2 |
11,400 |
| 4,000 |
37 |
2.5 |
3 |
10,300 |
| 6,000 |
30 |
2.5 |
4 |
9,400 |
| 8,000 |
15 |
2.5 |
5 |
9,250 |
| 10,000 |
14 |
2.5 |
|
|
| 12,000 |
10 |
2.5 |
|
|
For Vehicle Size
The standard 275 model is suitable for most 4WDs,
SUVs, small trucks, vans and utility vehicles, while the 375 suits larger
vans and small to medium trucks. Custom building is possible.
Unique Patented Technology
The Cut Snake is an electro-hydraulic hybrid winch using unique patented
technology. It combines the best aspects of both electrical winches and fluid-driven
winches. Patented in the USA, Canada, New Zealand and Australia
Very Low Battery Draw
Under load the Cut Snake has a 65 amp draw from the vehicle battery.
Compare this to 400 to 500 amps typically used by other winches of similar
capacity
Remote Operation
Standard model is operated by cordless radio remote, meaning the operator
can stand well clear of the winching danger zone - an important safety
feature
Free Spooling
Free spooling for cable run out - automatic engagement of winch spool via
remote controller
Spool Engagement Under Load
Positive spool engagement at all times while under load
Hydraulic Overload Protection
Hydraulic overload protection eliminates motor burnout problems of other
winches
Bi-Directional Control
Power control of cable in both directions - draw in and let out
Works Underwater or Under-mud
Hydraulic winch motor is fully sealed and capable of working when fully
submerged in water or mud
Taper Bearings
Timkin taper bearings on winch spool drive
Protected Components
All electronic wiring and solenoids mounted within the engine bay away
from harsh operating environments
Low Voltage Cut Out
Low voltage sensor and cut out ensures enough battery charge is left to
cold start vehicle
Hydraulic Outlets
Hydraulic outlets for jacks and tools
Unit Weight
30kgs (66lbs)
Double Safety
Double safety braking with internal disk brake and double over center
valves
Superb Quality
Highest quality standards of materials and engineering.
|